Data Sheet Overview
The xIO XLR-Series sets a new standard for performance IO with pristine audio, industrial-strength materials, exceptional design, AV control options, and a complete line of models that reliably deliver sophisticated results.
Series Features
- Wall mounted Mic/Line PoE Dante endpoints
- Transparent mic preamps with up to 51 dB of gain adjustable in 3 dB increments
- Studio-grade AD/DA
- Up to 4 channels of Dante IO with support for AES67 operation
- Support for sampling rates up to 96K
- Die-cast zinc construction with exacting tolerances
- Configuration from Composer with flexible control from Symetrix remotes, SymVue touchscreens panels, or user supplied devices
- Customizable front-panel RGB LEDs
- Programmable control buttons
- PoE IEEE 802.3af; 15.4W Max
- Available with premium black or white finishes
- Supports standard Decora faceplates
- Perfect for Conferencing, Hospitality, Education, House of Worship, or Fitness applications
- Symetrix five-year warranty
Technical Drawings
xIO XLR-Series Double-Gang US
xIO XLR-Series Single-Gang US
Device Specifications
| Power | PoE IEEE 802.3af; 15.4W Max |
| Operating Temperature | Ambient operating temperature 0 C-40 C (32 F-104 F); maximum recommended ambient operating temperature 30 C (86 F) |
| Sampling Rate | 48 kHz, 96 kHz (configure in Dante Controller) |
| Input THD+N | 0.003% (+15 dBu @ 1 kHz @ 0 dB gain) |
| Input Frequency Response | +/- 0.2 dB; 20 Hz-20 kHz (+4 dBu @ 0 dB gain) |
| Input Dynamic Range | > 110 dB (A-weighted @ 0 dB gain) |
| Input Crosstalk | -107 dB (+4 dBu @ 1 kHz @ 0 dB gain) |
| Maximum Input Level | +23.5 dBu (1% THD @ 1 kHz @ 0 dB gain) |
| Input EIN | <-127 dBu (150 Ohm source impedance, 22.4 kHz BW) |
| Input CMRR | >50 dB (1 kHz @ 0 dB gain) |
| Input Impedance | 2k Ohms balanced |
| Phantom Power | +48 VDC @ 10 mA maximum |
| Input Latency | 0.77 mS (Analog in to Dante Send) |
| Output THD+N | 0.005% (-4 dBFS @ 1 kHz) |
| Output Frequency Response | +-0.2 dB; 20 Hz-20 kHz (+4 dBu @ 0 dB gain) |
| Output Dynamic Range | > 110 dB (A-weighted @ 0 dB gain) |
| Maximum Output Level | +23.5 dBu (1% THD+N @ 1 kHz) |
| Output Impedance | 300 Ohms balanced |
| Output Latency | 0.60 mS (Dante Send to Analog Out) |
| Product Weight – Single Gang Euro | 0.7 lbs |
| Product Weight – Single Gang US | 0.75 lbs |
| Product Weight – Double Gang US | 1.25 lbs |
| Shipping Weight – Single Gang Euro | 1.2 lbs |
| Shipping Weight – Single Gang US | 1.25 lbs |
| Shipping Weight – Double Gang US | 1.75 lbs |
Architect and Engineer Specifications
The xIO XLR-Series endpoint devices shall enable input, output, and control of a Symetrix DSP system via XLR mic/line connectors, LED indicators, and a programmable button for user input.
The device shall be rectangular measuring either 3.1 inches (79.8 mm) wide, by 4.9 inches (124.3 mm) high, by 2.1 inches (54.0 mm) deep -or- 5.0 inches (125.9 mm) wide, by 4.9 inches (124.3 mm) high, by 2.1 inches (54.0 mm) deep.
It shall have appropriate XLR mic/line connectors for either one input and one output (xIO XLR 1×1), two inputs (xIn XLR 2), two inputs and two outputs (xIO XLR 2×2), or four inputs (xIn XLR 4). The endpoint shall be designed to mount in either a standard North American and European single-gang or double-gang wall and junction boxes.
The device shall provide a 1, 2 or 4 channel transmit and 1 or 2 channel receive network audio interface utilizing the Dante protocol and shall support AES67. The device shall communicate with a Symetrix DSP system via 10/100 Mbps Ethernet using standard TCP/IP protocols using an RJ45 jack on the rear panel.
Symetrix Composer® software application shall be provided that operates on a Windows computer, with a network interface installed, running Windows 10® or higher operating system. The designer application shall develop and manage the device’s signal parameters, LED state and color, and control buttons, constructed from objects within the Symetrix Composer software including faders, buttons, and meters.
The device shall operate in an environment with an ambient temperature range of 0° C to 40° C (32° to 104° F). The device shall be powered over Ethernet (PoE) by an IEEE 802.3af standard compliant switch. The device shall meet CE safety requirements and comply with CE, UKCA, EAC, and FCC Part 15 emissions limits. The device shall be RoHS compliant. The chassis shall be constructed of die-cast zinc. The device shall be a Symetrix xIO XLR-Series endpoint.
Specifications and features subject to change.