SKU:
PRODUCT DETAILS
The PT-MZ11KL is an 11,000lm-class projector delivering full brightness on AC 100–240 V power, eliminating the need for high-voltage power supply installation. The MZ series also supports the Near Field Communications (NFC) function, allowing you to quickly set up the projector’s settings without even powering it up. There is a full suite of optional lenses, including the ET-EMU100 Ultra-Short-Throw Zoom Lens for large-screen projection in tight spaces and pre-activated Geometry Pro upgrade kits, expanding the projectors’ built-in functions and enabling adjustments from a PC for flexible installation.
KEY FEATURES
- Small, Light, and Quiet 11,000lm LCD Projector
- Long-Life Energy-Saving Design Minimizes Problems
| Specification | Description |
|---|---|
| Dimensions (W x H x D) | Approx. 650 x 185 x 440 mm (25 19/32˝ x 7 9/32˝ x 17 5/16˝ ) (excluding feet and protrusions), 650 x 211 x 440 mm (25 19/32˝ x 8 5/16˝ x 17 5/16˝ ) (excluding protrusions, feet at shortest position) |
| LENS | Optional (no lens included with this model) |
| Resolution | WUXGA (1920 x 1200 pixels) |
| Operating environment | Operating temperature: 0–45 °C (32–113 °F)*9, operating humidity: 10–80 % (no condensation) |
| Keystone correction range | Vertical: ±45 ° (±5 ° with ET-EMU100, ±14 ° with ET-EMW200/ET-EMW300, ±22 ° with ET-EMW400/ET-EMW500), Horizontal: ±40 ° (±0 ° with ET-EMU100, ±8 ° with ET-EMW200/ET-EMW300,±15 ° with ET-EMW400/ET-EMW500). When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °. |
| Screen Size (Diagonal) | 2.03–15.24 m (80–600 in), 2.54–10.16 m (100–400 in) with ET-EMU100,2.03–12.70 m (80–500 in) with ET-EMT8004, 16:10 aspect ratio |
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro, Projector Network Setup Software, Smart Projector Control for iOS/Android™ |
| Contrast Ratio*1 | 3,000,000:1 (Full On/Full Off) (When [PICTURE MODE] is set to [DYNAMIC] and [DYNAMIC CONTRAST] set to [3].) |
| Note | *1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped. *2 When [OPERATING MODE] is set to [NORMAL]. This is the value when the Zoom Lens (Model No.: ET-EMS650) is used. Thevalue varies depending on the lens. *3 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, NORMAL Mode, [DYNAMIC CONTRAST] set to [3], under conditions with 30 °C (86 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 ofparticulate matter. Estimated time until light output decreases to 50 % will vary depending on environment. *4 ET-EMT800 is compatible with PT-MZ17KL/MZ14KL/MZ11KL only. It cannot be used with PT-MZ20KL. *5 4K signals are converted to the projector's resolution (1920 x 1200 pixels) uponprojection. 4K/60p and 4K/50p signals input via DIGITAL LINK are supported in YPBPR 4:2:0 format only. *6 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. On-mode power consumption measured at 25 °C (77 °F) operatingtemperature at an altitude of 700 m (2,297 ft). *7 Under conditions of 0.15 mg/m3 of particulate matter. Estimated maintenance time varies depending on environment. Filter can be washed and reused up to two times. *8 Average value. May differ depending on the actual unit. *9 Note that the projectorcannot be used at altitudes 2,700 m (8,858 ft) or higher above sea level. In the following operating environments, light output may be reduced to protect the projector: when the projector is used at altitudes below 1,400 m (4,593 ft) and ambient temperature is 35 °C (95 °F) or higher; when theprojector is used at altitudes between 1,400 m (4,593 ft) and 2,700 m (8,858 ft) exclusive and ambient temperature is 30 °C (86 °F) or higher. The operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F) when the optional AJ-WM50 Series Wireless Module is attached. |
| Power supply | AC 100–240 V, 50/60 Hz |
| Light source | Laser diode |
| Terminals | LAN | RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net) |
| Terminals | DC OUT | USB connector (Type A) x 1 for power supply (Output: 5 V / 2 A) |
| LCD panel | Panel size | 25.4 mm (1.0 in) diagonal (16:10 aspect ratio) |
| LCD panel | Drive method | Active matrix method |
| Terminals | SDI IN | BNC x 1: 3G/HD-SDI input |
| Terminals | HDMI IN | HDMI 19-pin x 2 (Compatible with HDCP 2.3, Deep Color, 4K/60p signal input5), CEC supported |
| Terminals | DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK connection (video/network/serial control) (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2],Art-Net, HDCP 2.3, Deep Color, 4K/60p signal input*5 ) |
| Terminals | REMOTE 2 IN | M3 x 1 for wired remote control |
| Terminals | SERIAL/MULTI PROJECTOR SYNC IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| Terminals | SERIAL/MULTI PROJECTOR SYNC OUT | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) |
| Weight*8 | Approx. 22.5 kg (49.6 lbs) |
| Terminals | REMOTE 1 | D-sub 9-pin (female) × 1 for external control (parallel) |
| Filter | Included (Estimated maintenance time: approx. 20,000 hours *7) |
| Operation noise*1 | 35 dB (NORMAL), 30 dB (QUIET) |
| Projector type | LCD projector |
| Lens shift | Vertical (from center of screen) | ±60 % (+50 %, -20 % with ET-EMU100, ±40 % with ET-EMW200, ±50 % with ET-EMW300) (powered) |
| Lens shift | Horizontal (from center of screen) | ±20 % (±19 % with ET-EMW200) (powered) |
| Center-to-corner zone ratio*1 | 85 % |
| Time until light output declines to 50 %*3 | 20,000 hours (NORMAL/QUIET) |
| Terminals | Remote 2 Out | M3 x 1 for link control (for wired remote control) |
| Light Output*1 *2 | 16,500 lm |
| LCD Panel | Display System | Transparent LCD panel (x 3, R/G/B) |
| LCD panel | Pixels | 2,304,000 (1920 x 1200 pixels) |
| Terminals | USB | USB connector (Type A) x 1 for optional AJ-WM50 Series Wireless Module, for USB memory |
| Power consumption*6 | Maximum power consumption | 615 W (6.3–2.7 A) (630 VA) |
| Power consumption*6 | On-mode power consumption (Light power)[Normal] | 540 W (AC 100–120 V),520 W (AC 200–240 V) |
| Power consumption*6 | On-mode power consumption (Light power)[Quiet] | 360 W (AC 100–120 V),340 W (AC 200–240 V) |
| Feature | Specification |